In the process of liquid injection, formation, aging, storage, and waste battery disposal, 1.5 volt lithium battery manufacturers may easily lead to combustion or explosion if there is a lack of management and inadequate risk prevention measures, especially if a large amount of non-standard storage may cause Lithium batteries burn or explode with great destructive power.
In order to prevent enterprise fire accidents and reduce accident losses and injuries, 1.5 volt lithium battery manufacturers should pay attention to the following points:

Article 1
1.5 volt lithium battery manufacturers need to establish a 24-hour monitoring and on-duty inspection system, and implement 24-hour monitoring and on-duty inspections for hazardous chemical storage sites and key places such as chemical formation, aging, and battery warehouses.
Article 2
The storage and use of dangerous chemicals such as electrolytes by 1.5 volt lithium battery manufacturers must comply with national standards.
Article 3
Separation, formation, aging workshops, and battery finished and semi-finished products warehouses should be set up separately, separated by solid walls, and used Class A fire doors; larger-scale aging workshops should be separated again by firewalls.
Article 4
The capacity separation, chemical formation, aging workshops and battery finished and semi-finished products warehouses need to be equipped with smoke and temperature alarms, which should be interlocked with the accident exhaust device; automatic fire extinguishing facilities or manual fire extinguishing facilities should be set up.
The fifth
1.5 volt lithium battery manufacturers need to formulate practical emergency response plans and conduct regular drills; configure water-based fire extinguishing devices and emergency materials such as fire blankets and high-temperature gloves.